Water heater 50 L, 2х800 W, with dry tube heater WV05039D

Water heater 50 L, 2х800 W, with dry tube heater WV05039D

247.08€
Brand:ELDOM
Product Code: WV05039D
Stock Instock

Overview

Installation     VerticalControl     mechanical controlWater tank     EnameledCapacity range     50Nominal power (kW)     1.6Nominal pressure [MPa]     0.7Mix 40 ° C [l]     85Type of electr...


Free-Delivery

Installation     Vertical
Control     mechanical control
Water tank     Enameled
Capacity range     50
Nominal power (kW)     1.6
Nominal pressure [MPa]     0.7
Mix 40 ° C [l]     85
Type of electric heating element     Dry heating element
Water heating energy efficiency class     C
Annual electricity consumption [kWh/annum]     1401
Load profile     M
Height x Width х Depth [mm]     760 x 387 x 410
Weight [kg]     18
Nominal volume [l]     50

SOLUTION FOR HARD AND SOFT WATER

• Two dry tube heaters – the heating element does not go into a direct contact with water; it is tightly fitted inside a thin tube which is enameled together with the water tank flange. The lack of calcareous precipitations on heater and water tank whole inside surface maintains the energy efficiency of water heater and extends its life-time;
• ENERGY SAVING - the thick insulation of 35 mm CFC-free polyurethane foam ensures extremely low heat losses and saves money;
• LONG LIFE – water tank coated with wear-proof zirconium enamel and two magnesium protectors for an optimal corrosion protection of the whole volume;
• RELIABLE – with a reliable "6-level protection"
• EASY MAINTENANCE -  if necessary, the dry heater can be replaced without having to drain out the water from the water heater;
• External thermostat – for setting the water heating temperature;
• Temperature indicator – to read the water heating temperature;
• Combined safety valve – jointly acting as balance and non-reverse and differential valve;
• Specific oval flange – of a special construction to guarantee your safety;
• Luminous double switch;
• Optionally, it is possible to fit an anode tester to control the corrosion protection state.